Panasonic SC-HG1 Series Reference Manual page 39

Name
All Controller Set
Input Command
Command Data
■ Output labels
Name
Execution Status o_bENO
Normal Completion o_bOK
Error Completion o_bErr
Error Code o_uErrId
Module Error Code o_ud16ModuleErrId[n]
Command Response o_d15CommandResponse[n]
Variable name Data type
i_bAllSetRequest Bit
Word
i_uCommand
[Unsigned]
Double
i_dCommandData word
[Signed]
Variable name
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Valid range
ON, OFF
H0 to H111(hexadecimal)
-32768 to 32767 (decimal)
The valid range differs from
command to command.
Data type Default
Bit OFF
Bit OFF
Bit OFF
Word
0
[Unsigned]
Double
word 0
[Unsigned]
Double
word 0
[Signed]
39/184
Description
Starting the FB with this label ON
sends the command to all the
controllers. Starting the FB with
this label OFF sends the command
to the controller specified by Set
Controller (i_uSetController).
For information on available
commands and the command data,
refer to the SC-HG1-C or
SC-HG1-CEF User's Manual.
Description
Stays ON while the FB is running.
Turns ON upon normal completion of the FB.
Turns ON upon error completion of the FB.
Stores the error code that occurred in the FB.
Stores the error code that occurred in the
communication unit.
16 arrays exist and store module error codes.
n=0: Master device
n=1: 1st slave device
to
n=14: 14th slave device
n=15: Communication unit
Stores the response data after the execution of
the read command.
15 arrays exist and each store write command
responses.
n=0: Master device
n=1: 1st slave device
to
n=13: 13th slave device
n=14: 14th slave device
WUME-SCHG1IQRFB-1