Appendix 1.6.2Checking Sc-Hg1-Cef - Panasonic SC-HG1 Series Reference Manual

Appendix 1.6.2 Checking SC-HG1-CEF
Upon completion of various settings, write the parameters to the CPU module and restart the PC to check the
communication.
[Online] → [Motor] → [Device/Buffer Memory Batch Monitor]
Once you enter the starting device in the device name box, all the information from the 1st station becomes visible.
In this example, you check the Remote READY flag (X107B) of station number 1 to see whether or not SC-HG1- CEF can
communicate.
Figure 1.6.2-1: Checking the Remote READY flag
Figure 1.6-2-2: SC-HG1-CEF remote input (RX) memory map
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
WUME-SCHG1IQRFB-1
151/184