Appendix 1.2. Connection Procedure Workflow - Panasonic SC-HG1 Series Reference Manual

Appendix 1.2.
Connection procedure workflow
The following diagram shows the procedure workflow until starting up the system.
[Prior confirmation] Check the devices
to be used and their specifications.
[Wiring and connection] Perform wiring
and connection work.
[Setup] Set up the hardware and
Connection confirmation
Working normally?
Start
parameters.
Exit
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
For information on connectable sensor amplifiers, see
"Appendix 1.3 Connectable models".
For information on the wiring of connectors for the
connection to the communication unit, see "Appendix 1.4
Wiring to the communication unit".
For information on the SC-HG1 settings and the parameter
settings, see "Appendix 1.5 Various settings".
Check the connection, using GX Works3.
See "Appendix 1.6 Connection check".
Troubleshooting
For information on what to do if the connection check fails,
see "Appendix 2 Troubleshooting".
134/184
WUME-SCHG1IQRFB-1