Panasonic SC-HG1 Series Reference Manual page 105

Item
Description of
functions
FB compilation
method
FB behavior
i_bEN input condition
I/O signal flow
movement
When Execution Command (i_bEN) is turned ON on the controller specified by Set Controller
(i_uSetController), this FB saves the setting value to the data bank identified by the value of Data
Bank No. (i_uDataBankNo) if Load Flag (i_bLoadFlag) is OFF or, if Load Flag (i_bLoadFlag) is
ON, loads the data bank identified by the value Data Bank No. (i_uDataBankNo).
Macro type
Pulse execution type (multi-scan execution type)
None
[Normal completion]
If a module error occurs:
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Description
[Error completion]
If an FB error occurs:
If Execution Command (i_bEN) is turned from
ON to OFF before Normal Completion (o_bOK)
or Error Completion (o_bErr) turns ON:
105/184
WUME-SCHG1IQRFB-1