Panasonic SC-HG1 Series Reference Manual page 84

Name
NC Flag
■ Output labels
Name
Execution Status o_bENO
Normal Completion o_bOK
Error Completion o_bErr
Error Code o_uErrId
Module Error Code o_ud16ModuleErrId[n]
Read Output Mode o_uReadOutputMode
Variable name Data type
i_bNCFlag Bit
Variable name
SC-HG1 Series FB Library Reference Manual for Mitsubishi MELSEC iQ-R series Sequencer
Valid range
ON, OFF
Data type Default
Bit OFF
Bit OFF
Bit OFF
Word
0
[Unsigned]
Double word
0
[Unsigned]
Word
0
[Unsigned]
84/184
Description
When started with this flag ON, the
setting "NC" is applied. When started
with this flag OFF, the setting "NO" is
applied.
Description
Stays ON while the FB is running.
Turns ON upon normal completion of the FB.
Turns ON upon error completion of the FB.
Stores the error code that occurred in the FB.
Stores the error code that occurred in the
communication unit.
16 arrays exist and store module error codes.
n=0: Master device
n=1: 1st slave device
to
n=14: 14th slave device
n=15: Communication unit
Stores the output logic settings in the word
information (consisting of 16 pieces of bit
information) that corresponds to the
controller on which to execute the command.
ON: NC
OFF: No.
bit 0: Master device
bit 1: 1st slave device
to
bit 14: 14th slave device
bit 15: Not used
WUME-SCHG1IQRFB-1