Auto-Calibration T9350 - Vision Fitness T9250 Owner's Manual

AUTO-CALIBRATION MODEL T9350
DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRATION!
Auto-calibration is not represented by a Px designation. "Auto" appears in the center
window. When you enter the function, "Auto" begins flashing. To begin auto-
calibration, press START. The treadmill will run through minimum and maximum
speed and maximum incline, this will take three to five minutes. Let the treadmill
perform this complete function before exiting the Engineering Mode.
Elevation A/D or Elevation in % appears in the left window. PWM value or speed
appears in the right window. "End" will appear in the center window when the auto-
calibration is complete. When auto-calibration is complete, it will take about 30
seconds to go to 0 elevation and return to the start-up screen with P1 showing in
the function window.
EXIT USER ENGINEERING MODE
P14 represents exit mode. When you press START to select the function, the con-
sole performs a reboot, returning to program setup.
6 1