User Engineering Mode T9350 - Vision Fitness T9250 Owner's Manual

USER ENGINEERING MODE T9350

Your treadmill offers a User Engineering Mode that can access certain data and help
to troubleshoot your treadmill. User Engineering Mode is designed for you to
access functions that will not affect important treadmill settings. To access this mode
please hold down SPEED DOWN and SELECT for 5 seconds while the treadmill is
in any state of setting up a program. When in the user mode, "USEr" displays in the
center window. To access the data press the ELEVATION keys to scroll through the
available data/functions. To select the data/function, press START. To exit, press
STOP.
U N I T S
P6 represents units, English or Metric. You can select this configuration for your
treadmill.
A number appears in the right window. If it is even, the treadmill is configured in
English units (miles/mph); an odd number represents a Metric configuration
(kilometers/kph). Press the SPEED arrows to toggle between English and Metric.
In order to save the modified value, press SELECT. Note that changing units does
affect the stored value of weight and clears any stored user programs. Changing
units may also require you to perform auto-calibration.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the right window. To modify weight,
press the SPEED arrows. To save the new default weight, press SELECT prior to
exiting. If Units is modified immediately prior, weight defaults to 150 lbs. or 68 kg.
ACCUMULATED TIME
P9 represents accumulated time, in hours. The SPEED keys are disabled while
viewing. To exit, press STOP . This information can not be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, in either miles or kilometers. The SPEED keys
are disabled while viewing. To exit, press STOP . This information can not be modified.
6 0