User Engineering Mode T9250 - Vision Fitness T9250 Owner's Manual

USER ENGINEERING MODE T9250

Your Treadmill offers a User Engineering Mode that can access certain data and
help to troubleshoot your Treadmill. The User Engineering Mode is designed for
you to access functions that will not affect important Treadmill settings. To access
this mode, please hold down the SPEED DOWN and SELECT buttons while the
Treadmill is at the startup mode. When in User mode, "USEr" will be displayed in the
data window. Use either set of arrow keys to access the available functions/data.
Press SELECT to select the data/function. To save data, hold down the SELECT
button until the Treadmill beeps. To exit, press STOP .
U N I T S
P6 represents units, Metric or English. You can change this configuration for your
Treadmill. When you enter P6, the large window shows the model number and the
small window shows the units. An even number represents English units (miles/
mph), and an odd number represents Metric units (kilometers/kph). You can change
the number using either set of arrow keys. Press and hold SELECT to save the data.
MAXIMUM TIME
P7 represents the maximum time the treadmill can be used (shown as minutes:
seconds). Use the arrow keys to change the time. To save the time, hold down the
SELECT button until there are two beeps.
DEFAULT WEIGHT
P8 represents the default weight. You can change this configuration for your treadmill.
To modify the weight, press the arrow keys. To save the new default weight, hold
down the SELECT button until there are two beeps
ACCUMULATED TIME
P9 represents accumulated time in hours. This information is for viewing only; the
data can not be modified.
6 2