AGFA ADC Solo User Manual page 43

3 Insert the cassette containing the image plate into the cassette slot of the ADC
Solo as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking mecha-
nism [2] at the bottom.
1
While the ADC Solo reads the identification data from the cassette chip, the status
indicator at the top of the machine is red and flashing.
The identification data will be displayed on the ID Station. Subsequently, the ADC
Solo returns the cassette to the cassette slot and displays the operator main screen.
4 Remove the cassette from the cassette slot.
2301D EN 20040224
2
43