Table of Contents
Advertisement
3
Insert the cassette containing the image plate into the cassette slot of the ADC
Solo as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking mecha-
nism [2] at the bottom.
While treating the image plate, the ADC Solo will display the following screen:
Miller
ADC SOLO
The ADC Solo:
• reads the cassette identification data;
• converts the information of the latent image to digital data;
• if fast preview is enabled, transmits the digital image data in blocks of typical 100
lines to the preview station;
• erases the image plate and re-inserts it into the cassette;
• gives the cassette ID data the status 'erased';
• returns the cassette;
• transmits the digital image data to the image processing station ('destination').
When the ADC Solo has treated the cassette, it displays the operator main screen.
If the ADC Solo displays an error message, refer to
list'
on page 50.
26
1
2
Chest AP
BUSY
'Troubleshooting check-
2301D EN 20040224
Hide quick links:
Advertisement
Table of Contents
