AGFA ADC Solo User Manual page 13

The keypad
The ADC Solo keypad features the following keys:
Emergency
key
Erase key
Key-
operator
key
Service key
Escape key
Confirm key
2301D EN 20040224
To give an image the status 'emergency' when it is
sent to the image processing station.
This key can only be used for cassettes with ID data.
To erase images without digitizing them.
This must be done if:
• an image plate has not been used for more than
3 days;
• an image plate has been exposed to an
exceptionally high X-ray dose.
To access advanced functions ('key-operator
functions').
To access service-level functions.
Reserved for trained service personnel.
To quit the current function or exit a menu without
saving modifications.
In key-operator mode:
• to select a menu.
• to accept an entry in a menu and go back to
operator mode.
13