AGFA ADC Solo User Manual page 35

Reading an emergency image plate in the dedicated configuration
In the dedicated configuration, you can digitize unidentified emergency image
plates. The digital image data will be assigned default ID data.
To digitize an emergency image plate, you must press the Confirm key after
you have inserted the cassette (refer to step 4). Image data transmission to
the preview and the image processing station will be suspended until you
have pressed the Confirm key.
To read an emergency image plate:
1 Check that the ADC Solo is ready for operation:
• the ADC Solo must display the operator main screen with 'Ready' status, e.g.:
VIPS not ready
ADC SOLO
• the status indicator at the top of the ADC Solo must be green and be lit constantly.
The ADC Solo is operational if the status field equals 'READY', even if status
messages of the destination are shown (e.g. 'VIPS not ready').
2 Press the appropriate
The emergency button determines the speed class, i.e. the sensitivity, which will be
used to digitize the image plate.
For digitizing images of the trunk.
For digitizing images of the limbs.
2301D EN 20040224
emergency button at the front of the
READY Status field
ADC Solo.
35