Table of Contents
Advertisement
Re-erasing image plates with status 'to be erased'
To re-erase an image plate which you have given the status 'to be erased' via
the ID station:
1
Check that the ADC Solo is ready for operation:
• the ADC Solo must display the operator main screen with 'Ready' status, e.g.:
ADC SOLO
• the status indicator at the top of the ADC Solo must be green and be lit constantly.
2
Insert the cassette into the cassette
The ADC Solo will automatically erase the image plate. The display will read:
When the ADC Solo has erased the image plate, it displays the operator main
screen.
3
Remove the cassette from the cassette slot.
2301D EN 20040224
* * * ERASING * * *
READY
slot.
BUSY
Status
41
Advertisement
Table of Contents
