Table of Contents
Advertisement
1.6
Description Of Modes
1.6.1
Mixed Original Mode
If the Mixed Orig key on the control panel is pressed when the copier is set
in 1- or 2-sided mode, or 2-in-1 mode, the copier detects the size of the
document each time a document is taken up and fed in. The copier feeds
the copy paper of a size selected from among the available paper sources
according to the document size detected.
1.6.2
1-Sided Original Mode
When in this mode, the copier detects the size of the document which is
taken up and fed in first.
The copier therefore needs to determine the size of the copy paper only
once based on the detected document size and the copying setting made on
the control panel. This makes for faster paper feed timing on the part of the
copier.
If a set of documents of varying sizes are used in this mode, image trouble could
result including missing copy image. (The system does not force a misfeed
condition.)
1.6.3
2-Sided Mode
The copier automatically turns over the 2-sided document for a speedy
copying operation (copies are made in the order of the first and second
pages).
1.6.4
2-in-1 Mode
When in this mode, the copier positions two different documents on the
Original Glass side-by-side for making a copy of the two documents onto
one side of a single sheet of paper in a single copy run.
If this mode is to be used for a set of documents of different widths, the
Mixed Orig key must first be pressed.
1.6.5
S-ADF (Single Feed) Mode
When a single document is placed in the Single Feed Tray, the ADF
automatically takes it up and feeds it in to let the copier run a single copy
cycle.
The ADF automatically takes up and feeds in documents even when two or more
documents are placed on the Single Feed Tray; However, it could result in a double
feed or other faulty condition. Only one document should therefore be loaded.
AFR-12/AF-5
NOTE
NOTE
M-10
Rev. 1.0/05.99
Advertisement
Table of Contents
