Konica Minolta AFR-12 General, Mechanical/Electrical page 41

For the Utmost Safety
For replacement parts, use the genuine parts with their part numbers
specified in the parts manual. Use of a wrong part could cause an overload
or dielectric breakdown, resulting in an electric shock or fire.
Replace a blown fuse or thermal fuse with the corresponding genuine part
with its part number specified in the parts manual. Use of a fuse with a
different rating or one with the same rating but of a different type can result
in a fire. Especially when a thermal fuse blows frequently, the thermal
control system is probably faulty. Be sure to take necessary action.
Before attempting to disassemble the machine, be sure to unplug its power
cord. The machine contains a high voltage unit and a circuit with a large
current capacity that may cause an electric shock or burn from sparking. The
machine also contains quick moving parts, which could injure a person. If
the machine uses a laser, a person can lose his/her eyesight by a laser
beam leak.
Wherever feasible, keep the covers and parts mounted when energizing the
machine. If it is absolutely necessary to energize the machine with its cover
removed, do not touch an exposed part that is being charged and use care
not to allow your clothing to be caught by a timing belt, gear, or other moving
part.
Do not leave the machine unattended while it is being energized.
To actuate an interlock switch with a cover removed or opened, be sure to
use the interlock switch actuating jig. Use of folded paper can damage the
interlock switch mechanism.
AFR-12/AF-5
Warning
CAUTION
Table Of Contents-2 Rev. 1.0/05.99