Table of Contents
Advertisement
3.2.9
Adjustment of ADF Registration Loop
1. Place a document on the Document Feed Table and press the Start key.
2. Change the setting for service choice "c-38", remove the document and place it
on the Document Feed Table again, then press the Start key.
3. Referring to the table below, repeat steps 1 and 2 until the document is
positioned so that it can be transported by the Transport Belt.
Setting Method
1. Press the "Stop", "0", "Stop", "1", "2" keys in that order.
2. Select the desired mode, then press the Start key.
3. Press the Clear key to clear the currently selected value.
4. Referring to the table below, enter a setting equivalent to the deviation.
5. Press the Start key to confirm the entry.
6. Press the Reset key twice to return to the main screen.
Deviatio
Setting
n (mm)
43
7
44
6
45
5
Moves in direction "a"
46
4
(towards the Original Width
Scale)
47
3
48
2
49
1
50
0
AFR-12/AF-5
Stop Position Adjustment Table
Direction
Setting
Default
D-16
Deviatio
n (mm)
51
1
52
2
53
3
Moves in direction "b"
54
4
(towards the Take-Up
55
5
Mechanism)
56
6
57
7
58
8
Direction
Rev. 1.0/05.99
Advertisement
Table of Contents
