Operator's Panel Leds - Seagate OneStor SP-3584 Installation & User Manual

OneStor® SP-3584 Installation & User Guide

5.3.3 Operator's Panel LEDs

The operator's (ops) panel (see
Figure 5–3
Table 5–3
Display/LED
Unit Identification Display
Power On/Standby LED
Module Fault LED
Logical Status LED
Drawer 1 Fault LED
Drawer 2 Fault LED
36
Figure 5–3) displays the aggregated status of all the modules.
Ops Panel LEDs
Ops Panel LED Descriptions
Description
Usually shows the identification number for the enclosure, but can be
used for other purposes.
Amber if the system is in standby. Green if the system has full power.
Amber indicates a fault in a PSU, cooling module or SBB I/O module.
Check the drawer LEDs to see if a drive fault is indicated (see section
5.3.4, "Drawer LEDs", on page
Amber indicates a fault from something other than GEM (usually a disk
drive fault, or an HBA, or an internal or external RAID controller).
Check the drawer LEDs to see if a drive fault is indicated (see section
5.3.4, "Drawer LEDs", on page
Amber if there is a drive, cable or sideplane fault in drawer 1. Open the
drawer and check the disk drive LEDs for faults.
Amber if there is a drive, cable or sideplane fault in drawer 2. Open the
drawer and check the disk drive LEDs for faults.
37).
37).