Chapter 3: Characteristics; Nytro Warpdrive 6203 Card Characteristics; Leds; Troubleshooting The Nytro Warpdrive Card - Seagate NWD-WLP4-200 User Manual

www.seagate.com

Chapter 3: Characteristics

This chapter presents characteristics for each Nytro WarpDrive card.
3.1

Nytro WarpDrive 6203 Card Characteristics

The Nytro WarpDrive 6203 card uses a low-profile, half-height, and half-length PCIe board.
The Nytro WarpDrive 6203 card uses a SAS2008 controller with drive firmware that runs on its internal processor. The
controller connects to up to four embedded nonvolatile memory modules. The Nytro WarpDrive 6203 card can be
used for either persistent or nonpersistent data and offers high-performance with low latency and a low CPU burden.
The following figure shows the Nytro WarpDrive 6203 card.
Figure 6 Nytro WarpDrive 6203 Card
3.1.1

LEDs

Three board-mounted, right-angle LEDs shine through holes in the PCI bracket: one is for data activity, one is for drive
life, and one is for drive status. The LEDs are labeled on the bracket.
3.1.2

Troubleshooting the Nytro WarpDrive Card

The LEDs provide key status information to diagnose any problem with the Nytro WarpDrive card. You can also
contact Seagate Technology Support Services
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
The following figure shows the LED layout.
.
Nytro WarpDrive 6203 Card Characteristics
16