Sbb I/O Modules; Power Supply Unit; Supported Drives - Seagate OneStor SP-3584 Installation & User Manual

A.7 SBB I/O Modules
A separate specification exists for each SBB I/O module.
A.8 Power Supply Unit
Output power
Voltage
Input voltage range
Input frequency
Power factor correction
Efficiency
Holdup time
Mains inlet connector
Weight
A.9 Supported Drives
The following drives are supported.
Hard Disk Drives (HDD)
Solid State Drives (SSD)
All Drives
2214W maximum continuous output power at high line voltage
+12V at 183A (2196W)
+5V standby voltage at 2.7A
200 to 240VAC
50 to 60Hz
>0.95 @ 100% load
81% at 10% load
89% at 20% load
93% at 50% load
90% at 100% load
15ms from ACOKn high to rails out of regulation (see SBB v2.1
specification)
IEC60320 C20 with cable retention
3kg
3.5" 7200rpm or slower 6 or 12Gb/s SAS drive
2.5" 10000rpm or slower 6 or 12Gb/s SAS drive with 3.5" adapter
3.5"6 or 12Gb/s SAS solid state drive
2.5" 6 or 12Gb/s SAS solid state drive with 3.5" adapter
Contact your storage vendor for details of other hard disk drives that
are available for use in the OneStor SP-3584 storage system.
Technical Specifications
59