Figure 3–3
Caution
Use only the power cords supplied or cords that match the specification in section
Warning
Once the enclosure is installed in the rack, dispose of the lifting straps. Due to the difficulty in
attaching the straps once the enclosure is installed in the rack, the straps are not suitable for
removing the enclosure from the rack.
3.2.2 Inserting Modules
Insert all of the modules and Disk Drives in Carriers (DDICs) by referring the following instructions:
• Section
• Section
• Section
• Section
Rear Enclosure Mounting
6.4.2, "Inserting a Cooling Module", on page
6.5.2, "Inserting a PSU", on page
6.6.2, "Inserting an SBB I/O Module", on page
6.3.2, "Inserting a DDIC", on page
51.
52.
55.
48.
Installation
B.5 on page
65.
23