Inserting A Ddic - Seagate OneStor SP-3584 Installation & User Manual

OneStor® SP-3584 Installation & User Guide

6.3.2 Inserting a DDIC

Important Failed drives must be replaced with approved drives. Contact your storage vendor for details.
If the relevant drawer is not already open, open it using the instructions in section
1
Drawer", on page
2 Lower the DDIC into the slot, with the drive capacity label facing towards you, as shown in
3 Push the DDIC downwards and hold it down while sliding the drive carrier plate in the direction shown
in Figure
Figure 6–6
4 Check that the release latch has returned to its locked position, as shown in
48
44.
6–6. This locks the drive in place.
Installing a DDIC Drive
6.2.1, "Opening a
Figure 6–6.
Figure 6–7.