Enclosure Management - Seagate OneStor SP-3584 Installation & User Manual

OneStor® SP-3584 Installation & User Guide
Figure 2–10 12Gb/s SAS EBOD Module (other I/O modules are available)
The system can operate with one or two modules. If the enclosure is run with a single module, the other
I/O module bay must be filled with a blank module. The presence of I/O modules is checked when the
power is switched on. The enclosure will not power up if there are no I/O modules present. An alarm
occurs when incompatible configurations are detected.
The enclosure chassis is keyed to prevent I/O modules from being inserted upside down.

2.7 Enclosure Management

SBB I/O modules actively manage the enclosure. If one of the modules fails in a two module system,
the other module will continue to operate.
If you require more details about enclosure management contact your storage vendor.
18