Enclosure Chassis - Seagate OneStor SP-3584 Installation & User Manual

OneStor® SP-3584 Installation & User Guide
Figure 2–3

2.3 Enclosure Chassis

The chassis consists of a sheet metal enclosure assembly with an integrated midplane PCB, module
runner system and two drawers for drive modules.
The chassis has a 19 inch rack mounting that enables it to be installed on to standard 19 inch racks and
uses 5 EIA units of rack space (8.75 inches; 222mm).
Each drawer contains 42 bays for Disk Drives in Carriers (DDICs). DDICs are top-mounted into the
drawers.
At the rear, the chassis assembly can accept two PSUs, two SBB I/O modules and five cooling modules.
10
Module Locations