Seagate OneStor SP-3584 Installation & User Manual page 55

Figure 6–4
Open the relevant drawer using the instructions in section
2
Locate the drive to be replaced, either by using the drive plan (see
3
amber LED on the drive that indicates a fault.
Push the drive carrier latch in the direction shown in
4
Figure 6–5
5 Pull the drive upwards and out of the drawer.
Important If you are not going to replace the drive immediately, close the drawer (see section
a Drawer", on page
Drive Location Plan
Removing a DDIC
45) so that correct airflow and cooling are maintained in the enclosure.
6.2.1, "Opening a Drawer", on page
Figure 6–4) or by looking for the
Figure 6–5 to unlock the drive.
Module Replacement
44.
6.2.2, "Closing
47