Installation; Preparation; Esd Precautions; Site Requirements - Seagate OneStor SP-3584 Installation & User Manual

Chapter 3

Installation

3.1 Preparation

Important Before attempting to install the system, read the safety chapter starting
Important The enclosure must be mounted in a rack before use.
Important Only service personnel should install the system.

3.1.1 ESD Precautions

It is recommended that you fit and check a suitable anti-static wrist or ankle strap and observe all
conventional ESD precautions when handling plug-in modules and components. Avoid contact with
backplane components and module connectors, etc.

3.1.2 Site Requirements

Before you begin, make sure the site where you intend to set up and use your storage system has the
following:
• Standard power from an independent source or a rack power distribution unit with a UPS.
• Host computer with the correct firmware, BIOS and drivers. Contact your supplier for the correct
software levels.
Before setting up your enclosure ensure you have the following:
• SAS HBA.
• Mini SAS HD to host cable.
• Power cord.
• Rack kit.
Refer to your supplier for a list of qualified accessories for use with the enclosure.
The accessory box contains the power cords and other ordered accessories.
on page 1.
19