Dealing With Hardware Faults; Firmware Updates; Psu Firmware Programming Failure - Seagate OneStor SP-3584 Installation & User Manual

OneStor® SP-3584 Installation & User Guide

5.6 Dealing with Hardware Faults

Ensure that you have obtained a replacement module of the same type before removing any faulty
module.
Important If the enclosure is powered on and you remove a module, replace it immediately. If the system is
used with any modules missing for more than a few seconds, the enclosure can begin to
overheat, causing power failure and data loss. Such action will invalidate the warranty.
Important Observe all conventional ESD precautions when handling OneStor modules and components.
Avoid contact with midplane components and module connectors, etc.

5.7 Firmware Updates

Information about updating the firmware in this product is supplied separately. Please contact your
supplier for details.

5.7.1 PSU Firmware Programming Failure

If a PSU's firmware is being programmed and the download fails, the PSU LEDs will flash.
Important If the PSU programming fails, the PSU can be reprogrammed but it must not be moved between
bays. If the PSU is moved it must be returned to the original bay before reprogramming can occur
42
.