Specifications; Models And Their Standard Specifications - Toshiba TOSVERT VF-AS1 Instruction Manual

12. Specifications

12.1

Models and their standard specifications

1) Standard specifications (small/medium capacity types)
Item
Voltage class
Applicable motor (kW)
Type
Form
Output capacity (kVA)
Note 1:
Output current
(A) Note 2:
Output voltage
Overload
current rating
Dynamic
braking circuit
Dynamic braking
resistor
Voltage-frequency
Allowable
fluctuation
Protective method
Cooling method
Color
EMI filter
DC reactor
Item
Voltage class
Applicable motor (kW)
Type
Form 4007PL 4015PL 4022PL 4037PL 4055PL 4075PL 4110PL 4150PL 4185PL 4220PL 4300PL 4370PL 4450PL 4550PL 4750PL
Output capacity (kVA)
Note 1:
Output current
(A)
Output voltage
Overload
current rating
Dynamic
braking circuit
Dynamic braking
resistor
Voltage-
frequency
Allowable
fluctuation
Protective method
Cooling method
Color
EMI filter
DC reactor
Note 1: Capacity is calculated at 220V for the 200V models and at 440V for the 400V models.
Note 2: Rated output current when the PWM carrier frequency (parameter CF) is 4kHz or less.
(For 400V-37kW or larger models: 2.5kHz or less)
The values between parentheses refer to rated output currents when set to 12kHz. ⇒ Refer to 5.17 for details.
Note 3: An external power supply backup available (optional) (Type: CSP002Z)
Note 4: ±10% when the inverter is used continuously (load of 100%).
0.4 0.75 1.5 2.2 3.7
2004PL 2007PL 2015PL 2022PL 2037PL 2055PL 2075PL 2110PM 2150PM 2185PM 2220PM 2300PM 2370PM 2450PM
1.1 1.8 3.0 4.2 6.7
3.0 4.8 8.0 11 17.5
(3.0) (4.5) (8.0) (10.5) (16.6)
Three-phase 200V~240V (The maximum output voltage is equal to the input supply voltage.)
Three-phase 200~240V-50/60Hz Note 3
Voltage + 10％ - 15% Note 5:
Built-in
External DC reactor (option)
0.75 1.5 2.2 3.7 5.5
1.8 3.1 4.4 8.0 11
2.3 4.1 5.8 10.5 14.3
(2.3) (4.0) (5.3) (8.6) (13)
Three-phase 380V~480V (The maximum output voltage is equal to the input supply voltage.)
Three-phase 380~480V-50/60Hz Note 3
Voltage + 10％ - 15% Note 4:
External DC reactor (option)
Specification
200V class
5.5 7.5 11 15
VFAS1-
10 13 21 25
27.5 33 54 66
(25.0) (33) (49) (64)
150%-1 minute, 165%-2 sec.
Built-in dynamic braking drive circuit
An external braking resistor (optional)
⇒
Rating: Refer to 5.19.
Frequency ±5％
IP20 Enclosed type (JEM1030)
Forced air-cooled
RAL7016
Basic filter (Not complies with the European EMC Directive)
Specification
400V class
7.5 11 15 18.5 22
VFAS1-
13 21 25 31 37
17.6 27.7 33 41 48
(17) (25) (32)
150%-1 minute, 165%-2 sec.
Built-in dynamic braking drive circuit
An external braking resistor (optional)
⇒
Rating: Refer to 5.19.
Frequency ±5％
IP20 Enclosed type (JEM1030)
Forced air-cooled
RAL7016
Built-in
L-1
E6581301
18.5 22 30 37 45
29 34 46 55 67
75 88 120 144 176
Built-in
30 37 45 55 75
50 60 72 88 122
66 79 94 116 160
Built-in
12