Toshiba TOSVERT VF-AS1 Instruction Manual page 237

[13] Tripless intensification setup [2/2]
Communi
Title cation Function
No.
Reverse-run prohibition
f311 0311
selection
0312 Random mode
f312
Carrier frequency control mode
0316
f316
selection
Synchronized deceleration time
0317 (time elapsed between start of
f317
deceleration to stop)
Synchronized acceleration time
(time elapsed between start of
f318 0318
acceleration to achievement of
specified speed)
*1: Changing the parameter  enables to set to 0.01 sec. (adjustment range: 0.01~600.0 sec.).
[14] Drooping control
Communi
Title cation Function
No.
f320 0320 Drooping gain
0321 Speed at drooping gain 0%
f321
f322 0322 Speed at drooping gain  0.0~320.0Hz (Enabled if =3, 4, 7 or 8)
f323 0323 Drooping insensitive torque
0324 Drooping output filter
f324
Adjustment range
0:Permit all
1:Prohibit reverse run
2:Prohibit forward run
0:Deselect, 1:Select
0:Not decrease carrier frequency automatically
1:Decrease carrier frequency automatically
2:Not decrease carrier frequency automatically,
400V class supported
3:Decrease carrier frequency automatically, 400V
class supported
0.1~6000 sec.
0.1~6000 sec.
Adjustment range
0.0~100.0% (Enabled if pt=3, 4, 7 or 8)
0.0~320.0Hz (Enabled if =3, 4, 7 or 8)
0~100% (Enabled if =3, 4, 7 or 8)
0.1~200.0 rad/s (Enabled if =3, 4, 7 or 8)
Sensorless vector/vector with sensor (●:Effective, -:Ineffective)
Minimum Vector control
setting unit Default Write during
Speed
(Panel/Communi setting running
control
cation)
1/1 0 Disabled ●/●
1/1 0 Disabled ●/●
1/1 1 Disabled ●/●
0.1/0.1 *1 2.0 Enabled ●/●
0.1/0.1 *1 2.0 Enabled ●/●
Sensorless vector/vector with sensor (●:Effective, -:Ineffective)
Minimum Vector control
setting unit Default Write during
Speed
(Panel/Communi setting running
control
cation)
0.1/0.1 0.0 Enabled ●/●
0.1/0.01 0.0 Enabled ●/●
0.1/0.01 0.0 Enabled ●/●
1/1 10 Enabled ●/●
0.1/0.1 100.0 Enabled ●/●
PM
V/f Reference
Torque
control
control
●/● ● ● 6. 14. 4
●/● ● ● 5. 17
●/● ● ● 5. 17
-/- ● ● 5. 18. 2
-/- ● ● 5. 18. 2
PM
V/f Reference
Torque
control
control
- - - 6. 15
- - - 6. 15
- - - 6. 15
- - - 6. 15
- - - 6. 15