February 2008
Installing the T1 links and EMC cable
requirements
Introduction
Each T1 link carries 24 channels. Each D/480JCT-2T1 board in the
CallPilot server supports two T1 links (48 T1 channels). CallPilot supports a
maximum of 192 channels or eight T1 links (four T1 cards).
Setting up the T1 link
The SL-100 switch connects through Line Side T1 cards or an external
channel bank while the DMS-100 switch connects only through an external
channel bank. For channel bank installation, refer to the documentation that
comes with the channel bank.
T1/SMDI and CallPilot Server Configuration
Connecting the CallPilot server to the switch
49