To Datafill Table Ucdgrp; Defining The Ucd Group - Nortel T1/SMDI Configuration Manual

Configuring the switch

Defining the UCD group

Introduction
Create a UCD group for each media type purchased for CallPilot. The
possible media types are:
Voice Messaging, if this feature has been purchased
Multimedia Messaging, if fax channels have been purchased
Speech Recognition, if this feature has been purchased
Dedicating channels to specific services
If you are dedicating channels to specific services, you must create an
additional UCD group for each service for which you plan to have dedicated
channels. Nortel recommends that you do not dedicate channels because the
overall efficiency of CallPilot is reduced.

To datafill table UCDGRP

1 Type table ucdgroup and press Enter.
2 Type add and press Enter.
3 Respond as shown in the following table:
ATTENTION
70
Each UCD group must have a unique primary DN.
Standard 1.13
CallPilot