194 System administration
DAP management
Use the procedures in this section to manage DECT Access Points (DAP).
Change a DAP Radio Part Number (RPN)
Use the following procedure to change the unique Radio Part Number
(RPN) of a DECT Access Point (DAP) if you need to manually configure
radio synchronization. Each DAP attempts to synchronize to the DAP with
the lowest RPN.
Procedure 95
Changing an RPN
Step
1
2
3
4
5
6
Copyright © 2008-2009 Nortel Networks
.
Action
Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
Click Access points .
The DECT Access Points page appears.
Select the DAP you want to edit.
Click Edit.
Enter the new RPN.
The RPN must be a hexadecimal two-digit number in the range
000 . . . 00F.
Click OK.
Wait until DAP reboots and starts working.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
--End--