Printing (Lpr/Port9100); Tcp/Ip Settings; Lpd Setting; Raw Port Number - Konica Minolta bizhub 751 User Manual

Setup items by operation
1.19

Printing (LPR/Port9100)

Specify settings for printing by using LPR or Port9100.
LPR printing is performed via the network using the LPR protocol. LPR printing is used in the UNIX-like OS.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a printer of the print destination.
Specify the settings according to the following flowchart.

LPD Setting

!
Detail
To print data using LPR or Port9100, settings for the printer driver must be specified after these
settings. For details, refer to the User's Guide [Print Operations (IC-208)].
1.19.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
1.19.2 LPD Setting
In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".
Specify the following setting.
Item
LPD
1.19.3

RAW Port Number

In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".
Specify the following setting.
Item
RAW Port Number
751/601
➀
"Specifying general settings for TCP/IP-based communication" on page
Definition
Select "Enable".
Definition
Select the check box for the port to be used, and then spec-
ify the RAW port number.
TCP/IP Settings
➀ LPR printing
➁ Port9100 printing
Finish
1
➁
RAW Port Number
1-2.
Prior confirmation
Prior confirmation
1-64