Reducing The Number Of Allegiant Cameras - Bosch LTC-1311-20 Configuration Manual

168 en | Troubleshooting
4.
5.
6.
26.4

Reducing the number of Allegiant cameras

You need the Allegiant Master Control Software to edit the Allegiant file.
To reduce the number of Allegiant cameras:
1.
2.
3.
4.
5.
6.
7.
8.
Configuration Client | V3 | 2010.07
Edit the Operator Client configuration file:
C:\<Bosch installation
directory>\Bosch\VMS\bin\OperatorClient.exe.config
Look for a line like the following:
<add key="MicrophoneInputNr" value="2"/>
If the number for the microphone differs from the number found in the log file, change
the number here to the number in the log file. In this example, change to number 1.
Restart Operator Client.
Now the microphone is used as input source.
Start the Master Control Software.
Open the Allegiant file.
Click the Camera tab.
Mark the cameras that are not required.
On the Edit menu, click Delete.
Save the file. The file size remains unchanged.
Repeat the last step for monitors that you do not need. Click the Monitors tab.
Import this file in Bosch Video Management System (see Section 6.3 Adding a device,
page 23).
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH