Advanced Settings > Audio Page; Privacy Masks Page; Advanced Settings > Recording Management Page - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
18.4 Advanced Settings > Audio page
This function allows you to set the gain of the audio signals to suit your specific requirements.
The current video image is shown in the small window next to the slide controls to help you
check the selected audio source and improve assignments. Your changes are effective
immediately.
The numbering of the audio inputs follows the labeling on the device and the assignment to
the respective video inputs. The assignment cannot be changed for Web browser connections.
Line In 1-Line In 4
Enter the value of the gain of the audio signal. Make sure that the display of the slider
remains green.
Line Out
Enter the value of the gain. Make sure that the display of the slider
Microphone (MIC)
Enter the value of the gain for the microphone.
Line Out/Speaker (SPK)
Enter the value of the gain of the line and the loudspeaker.
18.5

Privacy Masks page

Allows you to configure multiple areas on the camera image which are not recorded and
cannot be viewed. For example, you might want to hide public places adjacent to your
property.
18.6 Advanced Settings > Recording Management page
Active recordings are indicated by
If you point to the icon, you see detailed information about the active recordings.
Management mode
Specify how the device's recordings should be managed:
–
–
–
Overwrite older recordings
If activated, the oldest recordings are deleted as soon as the medium is full. A loop recording
process occurs.
If not activated, nothing more is saved to the medium once it is full.
Bosch Sicherheitssysteme GmbH
Recordings manually managed
The recordings are managed locally on the device. All relevant settings must be carried
out manually. The device is removed from the VRM system.
If activated, no further settings are required on this page.
Recording 1 managed by external VRM
The recordings of this device are managed by the VRM system, which is considered
external from the point of view of the device.
If activated, no further settings are required on this page.
Recording 1 managed by external VRM - Recording 2 used for ANR
Not supported.
Configuration Manual
Encoders / Decoders page | en 115
.
Configuration Client | V3 | 2010.07
remains green.