Configuring Cameras And Recording Settings; Copying And Pasting In Tables - Bosch LTC-1311-20 Configuration Manual

48 en | Configuring cameras and recording settings
9

Configuring cameras and recording settings

Main window >
This chapter provides information on how to configure the cameras in your Bosch Video
Management System.
You configure various camera properties and the recording settings.
Follow these references to get detailed information on the available application windows:
–
–
–
–
–
–



9.1

Copying and pasting in tables

You can configure many objects simultaneously within a Camera Table, an Event Configuration
Table, or an Alarm Configuration Table.
You can copy the configurable values of a table row in other rows:
–
–
–
You can copy the values in two different ways:
–
–
You can determine in which rows to paste:
–
–
To copy and paste all configurable values of a row into another row:
1.
2.
3.
To copy and paste one value of a row into another row:
1.
2.
To copy all configurable values directly:
1.
Configuration Client | V3 | 2010.07
Cameras and Recording
Section 21.1 Cameras page, page 133
Section 21.2 Recording settings pages, page 135
Section 21.4 Stream Quality Settings dialog box, page 136
Section 18.12.1 COM1, page 122
Section 21.5 PTZ Settings dialog box, page 138
Section 21.3 Copy Recording Settings dialog box (NVR only), page 136
Click to save the settings.
Click to undo the last setting.
Click to activate the configuration.
Copy all values of a row to other rows.
Copy only one value of a row to another row.
Copy the value of one cell to a complete column.
Copy into the clipboard and then paste.
Direct copy and paste.
Copy in all rows.
Copy in selected rows.
Right-click the row with the desired values and click Copy Row.
Click the row heading of the row that you want to modify.
To select more than one row press the CTRL key and point to the other row headings.
Right-click the table and click Paste.
The values are copied.
Right-click the row with the desired values and click Copy Row.
Right-click the cell that you want to modify, point to Paste Cell to, and click Current Cell.
The value is copied.
Click the row heading of the row that you want to modify.
To select more than one row press the CTRL key and point to the other row headings.
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH