Configuring A Dibos System; Configuring A Bosch Allegiant Device; Configuring A Startup Command Script - Bosch LTC-1311-20 Configuration Manual

28 en | Configuring devices
2.
3.
4.
5.
6.7

Configuring a DiBos system

Main window >
NOTICE!
You do not configure the DiBos system itself but only the Bosch Video Management System
related properties.
To scan for new DiBos devices:

To remove an item:
1.
2.
To rename a DiBos device:
1.
2.
6.8

Configuring a Bosch Allegiant device

Main window >
You do not configure the Bosch Allegiant device itself but only the Bosch Video Management
System related properties.
To assign an output to an encoder:
1.
2.
3.
Adding an input to a Bosch Allegiant device:
1.
2.
3.
Deleting an input:
1.
2.
3.
6.9

Configuring a startup Command Script

See Section 12.5 Configuring a startup Command Script, page 66.
Configuration Client | V3 | 2010.07
Select the required devices.
Click Update Firmware.
Select the file containing the update.
Click OK.
Devices > Expand
Right-click and click Scan for DiBos Devices.
The DiBos system is scanned for new devices and they are added.
Click the Cameras tab, the Relays tab, or the Inputs tab.
Right-click an item and click Remove.
The item is removed.
Right-click a DiBos device and click Rename.
Type the new name for the item.
Devices > Expand
Click the Outputs tab.
In the Usage column, click Digital Trunk in the desired cells.
In the Encoder column, select the desired encoder.
Click the Inputs tab.
Click Add Inputs.
A new row is added to table.
Type the required settings in the cells.
Click the Inputs tab.
Click the required table row.
Click Delete Input.
The row is deleted from the table.
Configuration Manual
Bosch Video Management System
>
>
Bosch Sicherheitssysteme GmbH