Logon Pair Properties; Logical Tree; Events And Alarms - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
Allows you to add a pair of user groups to a dual authorization group. The users of the first user
group are the users that must log on in the first dialog box for logging on, the users of the
second user group confirm the logon.
Select Logon Pair
In each list, select a user group.
Force dual authorization
Select the check box to force each user to log on only together with a user of the second user
group.
24.6 Logon Pair Properties page
Main window >
Allows you to modify a pair of user groups to a dual authorization group. The users of the first
user group are the users that must log on in the first dialog box for logging on, the users of the
second user group confirm the logon.
Select Logon Pair
In each list, select a user group.
Force dual authorization
Select the check box to force each user to log on only together with a user of the second user
group.
24.7 Logical Tree page
Main window >
Allows you to configure the Logical Tree for each user group.

Logical Tree

Select a check box to give the users of the selected user group access to the corresponding
devices.
You can recall the access to a camera on the Priorities page.
24.8 Events and Alarms page
Main window >
Allows to configure the permissions for the Events Tree, i.e. you set the events the user group
is authorized or not authorized to use.
For each event there is at least one device. For example, for the Video Loss event the
available cameras are the devices. For an event like Backup Finished the corresponding
device is Time Controlled Backup. Hence, a device can be a software process.


Bosch Sicherheitssysteme GmbH
User Groups >
User Groups >
User Groups >
Expand a tree item and click the required check boxes for enabling the events.
In the Camera column, select the check box to enable the events of all the available
devices. This ensures that the user group gets events from devices that this user group
has no access to. The access to the devices is configured on the Logical Tree page and
on the Priorities page.
To enable or disable all events at once, select or clear the Events and Alarms check box.
Configuration Manual
>
> Logical Tree tab
> Events and Alarms tab
Configuration Client | V3 | 2010.07
User Groups page | en 151