Pos + Atm Page; Add Bosch Atm/Pos-Bridge Dialog Box; Bosch Atm/Pos-Bridge Page - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
Password: (for SMSC device only)
Type the password that the device needs to connect to the SMSC dial-up provider if required.
You get the information about the required entry from your provider.
Protocol: (for SMSC device only)
Select the required protocol that the device uses to connect to the SMSC dial-up provider.
You get the information about the required entry from your provider.
Recipient:
Type the mobile phone number of the recipient of the short messages. Include the country
prefix without + sign (e.g. 0049170123456).
Message (max. 160 chars):
Type the text for the short message.
SMS Test Message
Click to send a test short message.
17.16

POS + ATM page

Main window >
Allows you to add and configure peripheral devices, for example, a Bosch ATM/POS Bridge.
If you want to add multiple bridges at one server, you must use different ports.
17.16.1

Add Bosch ATM/POS-Bridge dialog box

Main window >
Bridge command
Allows you to add a Bosch ATM/POS Bridge.
Name:
Type an appropriate name for the device.
IP address:
Type the IP address of the device.
Port 1:
Type the appropriate port number used for transmitting the keep alive signal (every 5
seconds).
Port 2:
Type the appropriate port number used for transmitting messages from the device.
17.16.2

Bosch ATM/POS-Bridge page

Main window >
tab
Allows you to configure a Bosch ATM/POS Bridge.
IP address:
Type the IP address of the device.
Bosch Sicherheitssysteme GmbH
Devices > Expand >
Devices > Expand > Right-click
Devices > Expand > Expand
Configuration Manual
Devices page | en 101
> Add Bosch ATM/POS-
> > Bosch ATM/POS-Bridge
Configuration Client | V3 | 2010.07