Removing A Table Row; Managing Resource Files; Configuring An Event; Duplicating An Event - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
11.2

Removing a table row

Main window >
You can only remove a table row that you or another user have added, i.e. you can delete
duplicated events or Compound Events.
Compound Events are located in the Event Tree under System Devices > Compound Events.
To remove a table row:
1.
2.
11.3

Managing resource files

For detailed information see:
–
11.4

Configuring an event

Main window >
To configure an event:
1.
2.
3.
4.
5.
6.
11.5

Duplicating an event

Main window >
You can duplicate an event to trigger different alarms for a particular event.
To duplicate an event:
1.
2.
Bosch Sicherheitssysteme GmbH
Alarms
Select the row.
Click .
Section 8.4 Managing resource files, page 42.
Events
In the tree, select an event or event state, for example System Devices > Authentication
> Operator Authentication Rejected.
The corresponding Event Configuration Table is displayed.
In the Trigger Alarm - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the alarm is triggered.
Select one of the Recording Schedules or Task Schedules that you have configured in the
Schedules page.
In the Log - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the event is logged. Only a logged event is displayed in
the Event List of the Operator Client.
In the Script - Script column, click a cell and select an appropriate Command Script.
In the Script - Schedule column, click a cell and select the appropriate schedule.
The schedule determines when the event triggers the start of the Command Script.
In the Minimum Event Time column, click a cell and type the number of milliseconds as
the minimum time between these events. Use this setting to prevent a switching sensor
from generating a large number of events.
Events
In the tree, select an event condition.
The corresponding Event Configuration Table is displayed.
Select a table row.
Configuration Manual
Configuring events and alarms | en
Configuration Client | V3 | 2010.07
59