Bosch LTC-1311-20 Configuration Manual page 25

Bosch Video Management System
To add a communication device:
1.
2.
3.
To add a peripheral device:
1.
2.
3.
To add a virtual input:
1.
2.
3.
4.
To add a network monitoring device:
1.
2.
To add a CCTV keyboard:
1.
2.
3.
To add an I/O module:
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Expand , right-click
The appropriate dialog box is displayed.
Enter the appropriate settings.
Click OK.
The communication device is added to your system.
Expand , right-click
The appropriate dialog box is displayed.
Enter the appropriate settings.
Click OK.
The peripheral device is added to your system.
Expand , click .
The corresponding page is displayed.
Click Add Inputs.
A row is added to the table.
Make the appropriate settings.
Click Add .
The virtual input is added to your system.
Expand , right-click
The Add SNMP dialog box is displayed.
Type a name for the SNMP device.
The network monitoring device is added to your system.
Expand , click .
The corresponding page is displayed.
Click Add Keyboard.
A row is added to the table.
Make the appropriate settings.
The keyboard is added to your system.
Expand , right-click
The Add dialog box is displayed.
Type the IP address of the device.
If you want to skip the currently selected device and jump to the next one, click Skip.
Select the device type.
The corresponding page is displayed.
Click the Inputs tab to change the display names of the inputs if required.
Configuration Manual
and click the required command.
and click the required command.
and click Add SNMP.
and click Add New ADAM.
Configuring devices | en
Configuration Client | V3 | 2010.07
25