Add Sequence Dialog Box - Bosch LTC-1311-20 Configuration Manual

Bosch Video Management System
Click to display the Add Sequence dialog box.
Click to rename a camera sequence.
Click to remove the selected camera sequence.
Add Step
Click to display the Add Sequence Step dialog box.
Remove Step
Click to remove selected steps.
Step
Displays the number of the step. All cameras of a particular step have the same dwell time.
Dwell
Allows you to change the dwell time (seconds).
Camera Number
Click a cell to select a camera via its logical number.
Camera
Click a cell to select a camera via its name.
Camera Function
Click a cell to change the function of the camera in this row.
Data
Type the time for the duration of the selected camera function. To configure this, you must
have selected an entry in the Camera column and an entry in the Camera Function column.
Data Unit
Select the unit for the selected time, for example seconds. To configure this, you must have
selected an entry in the Camera column and an entry in the Camera Function column.
Add to Logical Tree
Click to add the selected camera sequence to the Logical Tree and to close the dialog box.
19.4

Add Sequence dialog box

Main window >
Allows you to configure the properties of a camera sequence.
Sequence name:
Type an appropriate name for the new camera sequence.
Logical number:
For using with a CCTV keyboard, enter a logical number for the sequence.
Dwell time:
Enter the appropriate dwell time.
Bosch Sicherheitssysteme GmbH
Maps and Structure >
Configuration Manual
Maps and Structure page | en 129
> Sequence Builder dialog box >
Configuration Client | V3 | 2010.07