Installing The Jsa5800 Appliance - Juniper JSA5800 Hardware Manual

Installing the JSA5800 Appliance

Place the shipping container on a flat surface and carefully remove the hardware components.
To install the JSA5800 appliance:
1. Mount the JSA appliance in your server rack using the attached mounting brackets. See
JSA5800 Appliance Using Front-and-Rear-Mounting Flush to a Rack
2. Plug the power cords into each of the AC receptacle on the rear panel. See
Figure 5: Connecting the AC Power Cord
3. Plug the other end of the power cords into the wall socket.
Plug each power cord into a separate power circuit to ensure that the device continues to receive
power if one of the power circuits fails.
4. Plug the Ethernet cable into the Ethernet port on the back panel.
Installing the
.
Figure 5 on page
23
23.