Chassis Lifting Guidelines For The Jsa5800 Appliance; Ramp Warning - Juniper JSA5800 Hardware Manual

Chassis Lifting Guidelines for the JSA5800
Appliance
The weight of a fully loaded JSA5800 appliance is approximately 50 lb (22.7 kg). Observe the following
guidelines for lifting and moving a JSA5800 appliance:
• Before installing the appliance, read the guidelines in
• Before lifting or moving the JSA appliance, disconnect all external cables.
• As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep
your knees bent and your back relatively straight and avoid twisting your body as you lift. Balance
the load evenly and be sure that your footing is solid.
RELATED DOCUMENTATION

Ramp Warning | 61

Installation Instructions Warning | 60
Rack-Mounting and Cabinet-Mounting Warnings | 62
Grounded Equipment Warning | 66
Maintenance and Operational Safety Guidelines and Warnings | 71

Ramp Warning

WARNING: When installing the device, do not use a ramp inclined at more than 10
degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10 graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Avertissement Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10 degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
General Safety Guidelines and Warnings.
61