Juniper JSA5800 Hardware Manual page 46

Username: admin
Password: <root password>
<root password> is the new root password you set during the installation process.
3. Click Login To JSA.
The JSA interface appears. You are now ready to start tuning JSA and high availability (HA) settings.
For more information, see the
NOTE: You will need a permanent license for the JSA appliance to upgrade to a higher version. If
you have a temporary license, the upgrade will fail; run the installer again to upgrade to a higher
version.
SEE ALSO
Configuring Basic Settings on the JSA5800 Appliance | 0
Connecting the JSA5800 Appliance to a Management Device | 35
RELATED DOCUMENTATION
JSA5800 Installation Overview | 21
Installing the JSA5800 in a Rack | 22
Connecting the JSA5800 to Power | 32
Juniper Secure Analytics Administration Guide .
40