Jsa5800 Appliance Rack Requirements - Juniper JSA5800 Hardware Manual

SEE ALSO
JSA5800 Appliance Description | 0
Additional Hardware Requirements | 0

JSA5800 Appliance Rack Requirements

The JSA5800 appliance is installed in a four-post rack.
Table 7 on page 16 provides the details of requirements for rack size, clearance, airflow, spacing of
mounting brackets and flange holes, and connecting to the building structure.
Table 7: Rack Requirements for the JSA5800 Appliance
Rack Requirement Specifications
Size A 19-in. (48.3 cm) rack as defined in Cabinets, Racks, Panels, and Associated
Equipment (document number EIA-310-D) published by the Electronics Industry
Association (http:/ /www.eia.org).
Clearance
• The outer edges of the mounting brackets extend the width of either chassis
• The front of the chassis extends approximately 1.5-in. (3.8 cm) beyond the
Spacing of
• The appliance can be mounted in any rack that provides holes or hole
mounting bracket
and flange holes
• The mounting brackets and front-mount flanges used to attach the chassis to
• The appliance can be mounted in any rack that provides holes or hole
• The mounting holes in the mounting brackets provided with the appliance are
to 19-in. (48.3 cm).
mounting ears.
patterns spaced at 2-U [3.5-in. (4.5 cm)] increments.
a rack are designed to fasten to holes spaced at rack distances of 2-U (3.5-
in.).
patterns spaced at 1-U [1.75 in. (4.5 cm)] increments.
spaced 1.25-in. (3.2 cm) apart (top and bottom mounting hole).
16