Kodak 5500 User Reference page 47

Error Code Number And Message Required Action(s)
E291_Scanner
Disabled
E294_Fr_Cal_Fail
Calibration Reqrd
A-61075 March 1997
Operator Action
Press the C (clear/cancel) key to clear the message
(optional), enable the scanner from the host, then
press the Run key to start the transport system. If the
operator does not have access to the host, have the
system administrator enable the scanner from the
host. If the error message persists, contact the system
administrator.
System Administrator Action
If required, enable the scanner from the host. Verify
correct operation. If the error message persists, call
service.
Operator Action
Press the C (clear/cancel) key to clear the message
(optional), press the Cal key to commence the
calibration process again. If the error message
persists, verify that the front optical path is free of
obstructions, clean the Imaging Guides, and utilize an
appropriate Calibration Target. Press the Cal key and
try the calibration process again. If the error message
persists, contact the system administrator to scan and
view an image to determine whether the error has an
effect on the scanned images; if the system
administrator determines that the image quality is
appropriate, press the C (clear/cancel) key to clear the
error message and normal scanning can be
performed. If the error message persists, contact the
system administrator.
System Administrator Action
Verify correct operation. If required, scan and view an
image to determine whether the error has an effect on
the scanned images; if the image quality is
appropriate, press the C (clear/cancel) key to clear the
error message and normal scanning can be
performed. If the error message persists or if the
image quality is not appropriate, call service.
OM-29