Kodak 5500 User Reference page 27

Error Code Number and Message Required Action(s)
E119_Check
Current_IA/Level
E127_Wait_-
Image_Buffr_Full
E128_Doc_Inter-
val_Too_Narrow
A-61075 March 1997
Operator Action
Press the C (clear/cancel) key to clear the error
message, verify the current Image Level and Image
Address. This error message is just a warning to the
operator; if the C (clear/cancel) key is pressed the
error message will be cleared and the present
scanning can be continued. If the error message
persists, contact the system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
Operator Action
Wait for the error message to automatically clear and
the Feeder to automatically start or press the C (clear/
cancel) key to clear the error message (optional) and
wait for the Feeder to Automatically start. If the
Feeder does not automatically start, it is possible that
the host is not reading the images from the Image
Buffer and that the buffer will not gradually empty. If
this is the case or if the error message persists,
contact the system administrator.
System Administrator Action
If required, send the Read command from the host.
Verify correct operation. If the error message persists,
call service.
Operator Action
Adjust the Gap Adjustment Knob to widen the
document interval (refer to, "Adjusting The Feed
Roller And Separator Roller" section of the User's
Manual), press the C (clear/cancel) key to clear the
error message (optional). This error message is just a
warning to the operator; if the displayed error
message is ignored the present scanning can be
continued and the error message will be cleared at
the completion of scanning when the Stop or End key
is pressed. If the error message persists, contact the
system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
OM-9