Kodak 5500 User Reference page 37

Error Code Number and Message Required Action(s)
E223_Jam_-_Vert
Trans/Exit_Area
A-61075 March 1997
Operator Action
Open the access door and transport plate
corresponding to the jam area and remove all
damaged documents (optional). Close all transport
plates and access doors and the warming up process
will commence. When the warming up process is
complete (or directly after the error message is
displayed), press the Jog key to remove all
documents still in the transport system. The Image
Address is automatically set to the correct address,
but verify the Image Address and Image Level, and
then rescan the documents whose images have not
yet been transferred to the host; when the Run key is
pressed, if documents are detected under any of the
document sensors the error message "E234 Press
JOG To Remove Docs" will be displayed. If the
operator does not have access to the Image Header
to determine which documents have been scanned,
then contact the system administrator to determine
the last image that was transferred to the host. If the
error message persists, contact the system
administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
OM-19