Kodak 5500 User Reference page 30

Error Code Number and Message Required Action(s)
E139_ConfirmTone
Not_Mach_Enabled
E150_Buffer_Data
Transfer_To_Host
OM-12
Operator Action
Press the C (clear/cancel) key to clear the error
message (optional), then press the F key to input a
different function code. This error message is just a
warning to the operator; if the error message is
cleared by pressing the C (clear/cancel) key, normal
scanning can be performed. If the error message
persists or if the Confirmation Tone is required,
contact the system administrator.
System Administrator Action
Verify correct operation. If the error message persists
or if the Confirmation Tone is required, call service.
Operator Action
Press the C (clear/cancel) key to clear the error
message (optional), then press the F key to again
input function code F02 Select Application Mode. If all
the images have not yet been read by the host, the
error message will be displayed again. If the F key is
again pressed and function code F02 Select
Application Mode is input and the error message is
still displayed, it is possible that the host is not
reading the images from the Image Buffer. If this is
the case, the operator must contact the system
administrator. This error message is just a warning to
the operator; if the error message is cleared by
pressing the C (clear/cancel) key, normal scanning
can be performed. If the error message persists,
contact the system administrator.
System Administrator Action
If required, send the Read command from the host.
Verify correct operation. If the error message persists,
call service.
A-61075 March 1997