Wiring The Mil Connector - Panasonic FP0R User Manual

6.6 Wiring the MIL Connector

The connector indicated below is supplied with transistor type CPUs and I/O expansion units.
Use the wires indicated below. A pressure connection tool for connecting the wires is
recommended.
This connector can be ordered as an accessory.
Ordering information
Product no.
AFP0807
AXW61001
AXW7221
Suitable wire
Size Cross-sectional area [mm
AWG22
AWG24
Optional cables
Description
I/O cable with 10-pin MIL connector, (2pcs: 1  10 blue, 1  10 white wires), 1m
I/O cable with 10-pin MIL connector, (2pcs: 1  10 blue, 1  10 white wires), 3m
I/O cable with 10-pin MIL connector, (2pcs: 2  10 blue wires), 1m
I/O cable with 10-pin MIL connector, (2pcs: 2  10 blue wires), 3m
I/O cable with 10-pin MIL connector, (2pcs: 2  10 colored wires), 1m
I/O cable with 10-pin MIL connector, (2pcs: 2  10 colored wires), 3m
I/O cable with 40-pin MIL connector, blue wires, 1m
I/O cable with 40-pin MIL connector, blue wires, 3m
I/O cable with 40-pin MIL connector, colored wires according to DIN 47100, 3m
Pressure connection tool AXY5200FP
Product name
Connector set
Semi-cover
Crimp contacts
2
]
0.3
0.2
Type
10-pin type
10-pin type
For AWG22/24
Insulation thickness [mm]
 1.5–1.1mm
Installation and Wiring
Packaging
2 pieces
2 pieces
5 pieces
Rated current
3A
Product no.
AFP0521D
AFP0523D
AFP0521BLUED
AFP0523BLUED
AFP0521COLD
AFP0523COLD
AYT58403BLUED
AYT58406BLUED
AYT58406COLD
87